Shipping/Handling in the U.S.48 states is $11.95
for each shipment, from one item to six items. This is based on 1/18th
scale die cast models. More Shipping Info
Click Here
All diecast models and items are
1/18th scale unless noted.
Dodge Challenger
click on any image for larger view
Item #
AMM947 1957 Chrysler 300
Cloud White
Description: Using the earlier Ertl
Precision Series - Authentics Series mold,
these are made by AutoWorld (AMM).
Features
include correct style hinges for the opening hood,
doors, and trunk,
wired and very detailed
392 dual quad engine compartment,
a carpeted
interior with folding seats, folding sun visors,
plus opening trunk with
spare tire, jack, and trunk mat.
They also have working suspension,
rotating driveshaft,
and steerable front wheels.
Price : $64.95
Due August 2010
Item # 50677 1971 Dodge Challenger Hemi R/T
Mr. Norm's
Description:
It features Super/Stock
style fiberglass hood, aftermarket
5 spoke mag wheels, the door glass
and quarter side windows,
with the Mr Norm Sport Club "decals" in the
quarter glass.
Also features a super detailed 426 Hemi motor, with spark
plug wires, fuel lines, 4 tube headers, and battery cables,
plus has
an opening trunk with spare, mat, jack & instructions
, plus the Mr Norm
dealer decal on it also. Has a detailed chassis
with working suspension,
factory overspray, 4 tube headers,
and custom dual exhaust -
stopping just back of the
Dana 60 rear. Only 402 to be produced worldwide.
Only a few left not already pre-sold.
Price: $84.95 Due Late April 2010
Item # 50672 1970 Dodge Challenger Dick Landy's Pro Stock Hemi Challenger
Description:
A new
very very
detailed replica of Dick Landy's 1970 Pro Stock Challenger drag
car, as featured in the newest
Mopar Collectors Guide magazine.
It has the famous Silver Red Blue race
day paint scheme,
and features a super detailed 426 Hemi pro stock
motor.
With over 15 new molds/parts made by Die Cast Promotions/Hwy 61,
including 5 pin lift off hood, door glass and quarter side
windows,
a race tunnel ram, two dominator carbs, throttle linkage,
throttle
cable, cool can, fender mounted coil, a deep oil pan, a lift
off hood,
the no rear seat interior, 3 point roll bar, plus new deep
dish
Cragar S/S mag wheels, and some decent sized Goodyear slicks
on the
rear.
Also will have the spark plug wires, fuel lines, rotating
driveshaft, opening trunk ( and battery in it ), and
it may be the nicest
Dandy Dick Landy 1:18 die cast car to date.
A
very well detailed Limited Edition made for Supercar Collectibles.
Price: $84.95
Due Late April 2010
Item # 50760
Dodge Challenger SRT8
Dick Landy
Super Stock Tribute Car
Description:
The
Dodge Challenger Concept Super Stock drag car in
Silver Red Blue,
as featured in the newest Mopar Collectors Guide magazine. With the family's permission, this is a Dandy Dick Landy
(passed away Jan 2007) Tribute car,
and Supercar Collectibles is making this
limited edition of 402 DICK LANDY version's - just as we feel he
would be running today. Rumor has it - it may be built (real car).
The
many new molds/parts for this 1:18 car include the interior
roll cage,
cloth race harness/belts, no rear seat, TA style lift off hood, with
scoop, hood pins, some headers, turn down collectors, and the rear back
half of chassis re-made for in-set leaf springs, a Dana rear,
has Cragar wheels like Landy always ran, deep dish rears, plus some
slicks, wheelie bars, and a fuel cell. Also
features all the neat Hwy 61 opening & working features, carpeted
interior, correct style door and truck hinges, plus real nice overall
detail.
Price: $79.95
In Stock
Item # 50719
2008 Dodge Challenger SRT8
Black Crystal Pearl
Description:
a BRAND NEW MOLD by Hwy 61.
A 2008 Dodge Challenger SRT8 in Black
Crystal Pearl.
This is NOT a concept version,
but a replica of the production cars. It features all the
neat Hwy 61
opening
& working features, carpeted interiors,
the correct style hood, door,
and truck hinges,
rotating drive shaft, highly detailed chassis,
plus excellent detail.
Awesome looking in BLACK !!
SOLD OUT
Item # 50720
2008 Dodge Challenger SRT8
Silver Pearl Metallic
Description:
a BRAND NEW MOLD by Hwy 61.
A 2008 Dodge Challenger SRT8 in Silver Pearl Metallic.
This is NOT a concept version,
but a replica of the production cars. It features all the
neat Hwy 61
opening
& working features, carpeted interiors,
the correct style hood, door,
and trunk hinges,
rotating drive shaft, highly detailed chassis,
plus excellent detail.
Price: $74.95
In
Stock
Item # 50722
2008 Dodge Challenger SRT8
Super Stock Concept Car
Description:
The Dodge Challenger Super Stock Concept car in BLACK,
as the special car that Chrysler had built for testing purposes.
The new molds/parts include interior roll cage, cloth race harness,
no rear seat, TA style lift off hood with scoop, hood pins,
headers, turn down collectors, rear back half of chassis
re-made for in-set leaf springs, Dana rear, new wheels,
deep dish rears, slicks, wheelie bars, fuel cell
It also features all the
neat Hwy 61
opening
& working features, carpeted interiors,
opening door with correct hinges,
and trunk hinges,
rotating drive shaft, highly detailed chassis,
plus excellent detail.
SOLD OUT
Item # 50721
2008 Dodge Challenger SRT8
Super Stock Concept Car
Description:
The Dodge Challenger Super Stock Concept car in white/red/blue,
as the special car that Chrysler had built for testing purposes.
and as shown at SEMA Show.
The new molds/parts include interior roll cage, cloth race harness,
no rear seat, TA style lift off hood with scoop, hood pins,
headers, turn down collectors, rear back half of chassis
re-made for in-set leaf springs, Dana rear, new wheels,
deep dish rears, slicks, wheelie bars, fuel cell
It also features all the
neat Hwy 61
opening
& working features, carpeted interiors,
opening door with correct hinges,
and trunk hinges,
rotating drive shaft, highly detailed chassis,
plus excellent detail.
Description:
1970 Hemi Challenger T/A in Plum Purple with white
vinyl roof,black
interior, and
light green side stripes.
A very detailed Die Cast
Promotions (Hwy 61) car - with
just 402 made. Features
include
correct style hinges for the correct scooped hood, opening
doors,
and trunk, plus the 340 6 pack
motor is wired, plumbed, cabled.
Inside is a detailed, carpeted interior
with cloth seat belts,
moving visors, folding seats, then open the deck
lid to see
the trunk mat, spare tire, and jack. The chassis is also well
detailed,
has emergency brake cables, and even the driveshaft rotates.
Features the Grand Spaulding Dodge emblem on trunk lid.
Mr Norm packaging, and more Limited Edition of 402 cars made .
SOLD OUT
Item # 50241C
1971
Challenger R/T/Hemi Super Street
Color : Plum Purple
Limited Edition of 504 cars
Description:
The Super/Street 1971 Hemi Challenger in Plum Crazy Purple,
with a shaker hood, powered by a 426 Hemi with chrome valve covers,
headers, a rat Roaster intake, 2 fours, some new mold short
tailpipe exhaust (just behind read end), stock body color wheels
with the hubcaps popped off (no hubcaps) for racing (?), and
some slicks on the back. Made using the very detailed Die Cast
Promotions (Hwy 61) mold, and it is a Limited Edition of 504 cars made for Supercar Collectibles.
Price: $69.95 In Stock
but only one left
Item # 50690
1971
Challenger T/A 340 6 pack
"Brochure Car"
Color : Yellow /Black top
Limited Edition of 402 cars
Description:
This is the
1971 Challenger T/A in Yellow
as pictured in the 1971
Dodge sales brochure. Some say no
'71 T/A's were made. Some
say a few were made. The facts
are it was an option at the start
of the 1971 model year, so some could
have been made. Another
fact is none are known to exist today, but who's
to say a few
weren't made?
This as a replica of that 1971 Dodge
"sales brochure" car, and the
photo is the actual picture used
in that 1971 sales brochure.
Yellow with a black vinyl roof, black
interior, and very detailed.
Made by Die Cast Promotions / Hwy as a
Limited Edition of 402 cars,
made
exclusively for Supercar Collectibles.
340-6
powered with a black interior & dog dish
wheels
as a Hwy 61 Ltd Edition. It has the T/A hood,
a 4 speed, and correct style hinges on the
opening hood, doors, and
trunk. Under the hood
is wired & plumbed, plus interior is carpeted with
moveable
visors, and spare tire & jack are in the trunk.
Description:
In a private museum.
This
1971 Challenger
in
Hemi Orange with Orange R/T
side stripes really stood out!
Then we noticed
the 440-6 motor, power bulge hood,
black interior & black vinyl roof,
all adding to the beauty of this true
muscle car.
This as a replica of that 1971 Challenger R/T
museum car,
and the photo above is of that actual car right in
the museum (stripe
reflecting due to a flash used - so stripe not
really as bright as in
photo).
The 1:18 replica made by Die Cast Promotions/Hwy 61
as a Limited
Edition of 402 cars
made exclusively for Supercar Collectibles.
Produced by Die Cast Promotions/Hwy 61 so features the
correct
style hinges on the opening hood, opening doors, and opening
trunk. ,interior has
carpeting,
cloth seat belts, and moveable visors.
Chassis is detailed
with complete exhaust system,
working suspension, and rotating
driveshaft.
Description: 1971 Dodge Challenger convertible is a replica of the INDY 500 Pace Car.
The car is Hemi Orange, white interior, and all the race day
pace car
lettering. These are made with a NEW mold being made by
Greenlight
Collectibles.
It has top down, opening hood,
opening doors,
with nicely detailed engine, etc.
Home Page
In Stock